REINVENTING WATER PUMPS

During the last two years we have designed and developed a revolutionary non clogging pump, taking in consideration the environment. It is being damaged by wipes, personal hygiene items and toiletries that are being thrown into the sewage system.

About Us

Galim USA LLC is a privately owned company with more than 25 years of experience in the water pump industry, offering unique, premium quality sewage and grinder pumps.
We have designed and patented our pumps to give a solution for household and commercial use. Having a strong commitment to environmental care leads us to present the first pump that makes a positive impact on our planet.

We are proud to have a 100% American Assembled product.

INNOVATION

We created a patented 304 stainless steel protective shell with specific diameter drillings located strategically. We added a barrier in order to avoid any clogging or jamming, creating a space within the drills so the water can go through normally.

Protective Shell

Show text

Built up in 304 stainless steel with a 1,5mm thickness. This shell was specially designed in order to allow the entrance of solids like organic and human waste, its diameter only allows these decomposed and degraded solids enter.
The drillings are strategically distributed so in the lower part of the shell (suction area) they get smaller, preventing solid materials such as wires, rocks, glasses, irons or any other large build material from entering into the pump.
This patented design is a result of thinking about the moment when our pump demands its maximum power, the start. This is when all the sediments and solids accumulated in the ground can be absorbed and clog the turbine.
Our protective shell avoids this extreme situation by keeping away any hazardous solid from the pump and it prevents sedimentation from forming inside of it.

Built up in 304 stainless steel with a 1,5mm thickness. This shell was specially designed in order to allow the entrance of solids like organic and human waste, its diameter only allows these decomposed and degraded solids enter.

The drillings are strategically distributed so in the lower part of the shell (suction area) they get smaller, preventing solid materials such as wires, rocks, glasses, irons or any other large build material from entering into the pump.

This patented design is a result of thinking about the moment when our pump demands its maximum power, the start. This is when all the sediments and solids accumulated in the ground can be absorbed and clog the turbine.

Our protective shell avoids this extreme situation by keeping away any hazardous solid from the pump and it prevents sedimentation from forming inside of it.

Barrier Spring

The barrier spring are made in stainless steel 304. This innovative barrier spring is fundamental for the outstanding performance of our pump and a key factor when facing problems caused by wet wipes, hygienic and cleaning items in general.
Every single one of these items can clog and cloak the drillings, blocking the entry of water. These spring barriers stop any solid from touching the drillings, creating an empty space within the protective shell and all the solids, letting the water flow to move them away.

Show text

The barrier spring are made in stainless steel 304. This innovative barrier spring is fundamental for the outstanding performance of our pump and a key factor when facing problems caused by wet wipes, hygienic and cleaning items in general.
Every single one of these items can clog and cloak the drillings, blocking the entry of water. These spring barriers stop any solid from touching the drillings, creating an empty space within the protective shell and all the solids, letting the water flow to move them away.

Start and stop the pump

Show text

This sensor flow says goodbye to the old mechanical float switch system design from traditional pumps.
An innovative technology with the only function to turn on and off the pump. This sensor flow is built-in with an electronic circuit composed of 2 small stainless steel plates that activates the pump once it gets immersed in liquid.
As soon as it gets exposed to the air, a 1 minute countdown starts in order to turn off the pump. This great advantage prevents the pump from working when it’s not necessary, saving energy and your money. We can finally say goodbye to float switches and their frequent disadvantages.

GALIM USA™ LLC. pumps have an innovative technology with the sole function of activating and deactivating the pump. The floating switch is in combination with an electronic circuit that drives the pump to start. Once the desired water level is reached, the float will send an electrical pulse and the pump motor will come into operation. The moment the level drops to the point that the float sends the cut-off pulse, a factory-set timer will turn off the pump after one minute. This advantage prevents the pump from operating when it is not necessary and not stopping in situations where there is still some water level, at the same time, generating great energy and economic savings and allows a complete emptying avoiding great sedimentation.
.

Flap Check Valve

Show text

The Flat Valve is a fundamental piece of the Sewage Pumps, these valves can completely open to allow the flow of solids and close to avoid the wáter to flow back down. Galim USA included this type of valve that’s placed right on the exit of the pump. By being part of the structure of the pump, there is no longer a need of installing this valve on the pipe itself. Galim’s Flat valve is made out of 304 Stainless Steel and Cast Iron.

Stainless Steel Sewage Impeller

Show text

All of Galim’s Sewage Pumps come with an open impeller that contains 2 veins made out of 100% 304 stainless steel. Since these don’t allow rust or abrasion to wear
them out, these provide a much longer hydraulic performance than the ones made out of Cast Iron or Plastic.

Steel Grinder Impeller

Show text

Grinder Pumps come with a cutting system that’s combined with 2 pieces. 1: Helicoidal Impeller with a flat cutting edge made out of 4CR13 Steel. 2: The base of the blade is made
in GCR15. Its purpose is to cut organic material.

Air Valve

Show text

When first turning on the pump or when the liquid inside the tank goes below the level of the volute, the air gets inside the pump and blocks the entry of liquid. This will stop the pump from working.
At Galim USA we designed an air relief valve as a solution to this problem.

Designed in USA

Show text

Our pumps were designed, developed, tested, and assembled in the USA under the highest quality requirements ensuring a fluid, after-sales assistance, and confidence guarantee.

Quality Materials

Show text

NSK Bearings 304 stainless steel turbine Iron parts dipped in nikel, retarding oxidation up to 3 times longer. Highly shock and rust resistant housing constructed of 304 stainless steel with a thickness of 1.5mm. Bronze cable gland with resin impregnated connections. 304 stainless steel barrier springs with a thickness of 3mm. Winding with class F insulation supporting up to 302F (150C). Eco-friendly lubricant oil 304 stainless steel motor housing Resin impregnated smart timer circuit. Hard steel helical turbine with cutting edges (exclusive on Grinder line) Tungsten turbine bracket (exclusive on Grinder line) 304 stainless steel KM locking nut. Silicone rings

OUR PRODUCTS

SEWAGE PUMP EXTREME

GRINDER PUMP

SEWAGE PUMP

SUSTAINABILITY

Every single non-organic material that makes its way into the sewer collection system, results in blockages and system failures causing damage to expensive equipment.
These materials will make their way to the wastewater treatment plants ending up with small microfibers and microplastics being released into the environment.

Our commitment with environmental care leads us to present the first pump in the industry that will truly make a positive change in our planet. Galim USA’s water pumps will block the majority of the non-biodegradable items to make their way into the sewage system. This will avoid any clogging or overflow in your property as well as reduce damage in water treatment plants. We came up with a solution to the biggest problems in this industry. We created a changemaker pump for our community. We commit ourselves and the entire industry to continue building a more sustainable and green planet.

level saturation

44 gallons (166lt) every 2000 wet wipes

Level SATURATION

100 gallons (378lt) the pump will support 5000 wet wipes.

we care about environment

Galim News

BuildExpo: July 20-21

The Water Expo: August 23-25

South Florida Plumbing and Mechanical Trade Show & Expo : Nov 17

Get in touch

Phone

786 233 4203

Hours

Monday to Friday from 9 am to 5 pm

Call Now Button